XGK CPU (LS Standard Ladder Programming)

Premium CPU for high-speed and large scale application

XGK-CPUUN

  • Program capacity: 256K steps
  • I/O points: 6,144
  • I/O device point: 65,536 (Remote I/O)
  • Processing speed: 8.5ns/step

XGK-CPUHN

  • Program capacity: 128K steps
  • I/O points: 6,144
  • I/O device point: 65,536 (Remote I/O)
  • Processing speed: 8.5ns/step

XGK-CPUSN

  • Program capacity: 64K steps
  • I/O points: 3,072
  • I/O device point: 65,536 (Remote I/O)
  • Processing speed: 8.5ns/step

XGK-CPUU (Ultra capacity)

  • Program capacity: 128K steps
  • I/O points: 6,144
  • I/O device point: 32,768 (Remote I/O)
  • Processing speed: 28ns/step

XGK-CPUH (High performance)

  • Program capacity: 64K steps
  • I/O points: 6,144
  • I/O device point: 32,768 (Remote I/O)
  • Processing speed: 28ns/step

XGK-CPUA (Advanced)

  • Program capacity: 32K steps
  • I/O points: 3,072
  • I/O device point: 32,768 (Remote I/O)
  • Processing speed: 28ns/step
General sequence controller PLC CPU

XGK-CPUS (Standard)

  • Program capacity: 32K steps
  • I/O points: 3,072
  • I/O device point: 32,768 (Remote I/O)
  • Processing speed: 84ns/step

XGK-CPUE (Economic)

  • Program capacity: 16K step
  • I/O point: 1,536
  • I/O device point: 32,768 (Remote I/O)
  • Processing speed: 84ns/step
Premium CPU for high-speed and large scale application

XGK-CPUUN

  • Program capacity: 256K steps
  • I/O points: 6,144
  • I/O device point: 65,536 (Remote I/O)
  • Processing speed: 8.5ns/step

XGK-CPUHN

  • Program capacity: 128K steps
  • I/O points: 6,144
  • I/O device point: 65,536 (Remote I/O)
  • Processing speed: 8.5ns/step

XGK-CPUSN

  • Program capacity: 64K steps
  • I/O points: 3,072
  • I/O device point: 65,536 (Remote I/O)
  • Processing speed: 8.5ns/step

XGK-CPUU (Ultra capacity)

  • Program capacity: 128K steps
  • I/O points: 6,144
  • I/O device point: 32,768 (Remote I/O)
  • Processing speed: 28ns/step

XGK-CPUH (High performance)

  • Program capacity: 64K steps
  • I/O points: 6,144
  • I/O device point: 32,768 (Remote I/O)
  • Processing speed: 28ns/step

XGK-CPUA (Advanced)

  • Program capacity: 32K steps
  • I/O points: 3,072
  • I/O device point: 32,768 (Remote I/O)
  • Processing speed: 28ns/step
General sequence controller PLC CPU

XGK-CPUS (Standard)

  • Program capacity: 32K steps
  • I/O points: 3,072
  • I/O device point: 32,768 (Remote I/O)
  • Processing speed: 84ns/step

XGK-CPUE (Economic)

  • Program capacity: 16K step
  • I/O point: 1,536
  • I/O device point: 32,768 (Remote I/O)
  • Processing speed: 84ns/step

Specifications

XGK CPU
Item Description Remarks
XGK-CPUUN XGK-CPUHN XGK-CPUSN
Operation method Cyclic execution of stored program, Time-driven interrupt, Process-driven interrupt
I/O control method Batch processing by scan synchronization (Refresh), Direct input/output by instruction
Program language Ladder diagram, Instruction list, SFC(Sequential Function Chart), ST(Structured Text)
Number of instructions Basic 40
Application 700
Processing speed LD 0.0085㎲/step
MOVE 0.0255㎲/step
Real number operation ± : 182.2ns(S), 327.3ns(D) S: Single real number D: Double real number
X : 336ns(S), 427ns(D)
÷ : 345ns(S), 808ns(D)
Program capacity 256Kstep (2,048KB) 128Kstep (1,024KB) 64Kstep (512KB)
I/O points(availableto install) 6,144 6,144 3,072
Data area P P00000 ~ P4095F(65,536 points )
M M00000 ~ M4095F(65,536 points )
K K00000 ~ K4095F(65,536 points )
L L0000 ~ L11263F(180,224 points )
F F0000 ~ F4095F(65,536 points )
T 100ms : T0000 - T2999 Timer (Adjustable)
10ms : T3000 - T5999
1ms : T6000 - T7999
0.1ms : T8000 - T8191
C C0000 ~ C4095
S S00.00 ~ S255.99
D D0000 ~ D524287 D0000 ~ D262143
U U0.0~U7F.31 U0.0~U3F.31 Special module data refresh area
Z 256 points
N N00000 ~ N21503
R 16 block 8 block 2 block 32Kwordper1block(R0~R32767)
Flash area 2M byte, 32 blocks Controllable by R device
Program type Total program 256
Initialization 1 (_INT)
Time-driven 32
Internal 32
Operation mode RUN, STOP, DEBUG
Self-diagnosis Execution, Delay, Memory error, I/O error, Battery error, Power error Modbus slave
Programming port RS-232C (1Ch), USB (1Ch)
Data retention at power failure Set “retain” at data declaration
Max. expansion stage 7 3 Total length 15m
Current consumption (mA) 960
Weight (Kg) 0.12


Item Description Remarks
XGK-CPUU XGK-CPUH XGK-CPUA XGK-CPUS XGK-CPUE
Operation method Cyclic execution of stored program, Time-driven interrupt, Process-driven interrupt -
I/O control method Batch processing by scan synchronization (Refresh), Direct input/output by instruction -
Program language Ladder diagram, Instruction list, SFC(Sequential Function Chart), ST(Structured Text) -
Number of instructions Basic 40 -
Application 700 -
Processing speed LD 0.028㎲/Step 0.084㎲/Step -
MOVE 0.084㎲/Step 0.252㎲/Step -
Real number operation ± : 0.602㎲(S), 1.078㎲(D)
X : 1.106㎲(S), 2.394㎲(D)
÷ : 1.134㎲(S), 2.66㎲(D) 		± : 1.442㎲(S), 2.87㎲(D)
X : 1.948㎲(S), 4.186㎲(D)
÷ : 1.442㎲(S), 4.2㎲(D) 		S: Single real number D: Double real number
Program capacity 128Kstep(512KB) 64Kstep(256KB) 32Kstep(128KB) 16Kstep(64KB) -
I/O points(availableto install) 6,144 3,072 1,536 -
Data area P P00000 ~ P2047F(32,768 points) -
M M00000 ~ M2047F(32,768 points) -
K K00000 ~ K2047F(32,768 points) -
L L0000 ~ L11263F(180,224 points) -
F F0000 ~ F2047F(32,768 points) -
T 10ms : T1000 - T1499  100ms : T0000 - T0999
1ms : T2000 - T2047  1ms : T1500 - T1999 		-
C C0000 ~ C2047
S S00.00 ~ S127.99
D D0000 ~ D32,767 D0000 ~ D19,999
U U0.0~U7F.31 U0.0~U3F.31 U0.0~U3F.31 U0.0~U1F.31 Special module data refresh area
Z 128 points
N N00000 ~ N21503 -
R 2 block 1 block 32Kwordper1block(R0~R32767)
Flash area 2M byte, 32 blocks Controllable by R device
Program type Total program 256
Initialization 1 (_INT)
Time-driven 32
Internal 32
Operation mode RUN, STOP, DEBUG
Self-diagnosis Execution, Delay, Memory error, I/O error, Battery error, Power error Modbus slave
Programming port RS-232C (1Ch), USB (1Ch)
Data retention at power failure Set “retain” at data declaration
Max. expansion stage 7 3 1 Total length 15m
Current consumption (mA) 960 940
Weight (Kg) 0.12


XGK/XGI CPU built-in Ethernet specification
Item XGK-CPUSN, CPUHN, CPUUN / XGI-CPUUN Remarks
Ethernet Feature 1 Port -
10/100BASE-TX -
Auto negotiation (Full-duplex and half duplex) -
Auto MDIX Crossover -
Max. Support 4 channel Support 8Kbyte each send and receive channel
Max. Distance between nodes : 100m -
Max. Protocol size : 1500Byte IP Fragmentation is not supported.
Cable UTP, STP, FTP cables is available FTP, STP is recommended to prevent noise
Service Setting communication parameters with XG5000 -
Loader service (XG5000 connection) supported Remote stage 1 connection with PLC is available
LS protocol(XGT) supported. Server & TCP supported. Client & UDP not supported.
Other company’s protocol (Modbus TCP/IP) supported
XGK CPU
Item Description Remarks
XGK-CPUUN XGK-CPUHN XGK-CPUSN
Operation method Cyclic execution of stored program, Time-driven interrupt, Process-driven interrupt
I/O control method Batch processing by scan synchronization (Refresh), Direct input/output by instruction
Program language Ladder diagram, Instruction list, SFC(Sequential Function Chart), ST(Structured Text)
Number of instructions Basic 40
Application 700
Processing speed LD 0.0085㎲/step
MOVE 0.0255㎲/step
Real number operation ± : 182.2ns(S), 327.3ns(D) S: Single real number D: Double real number
X : 336ns(S), 427ns(D)
÷ : 345ns(S), 808ns(D)
Program capacity 256Kstep (2,048KB) 128Kstep (1,024KB) 64Kstep (512KB)
I/O points(availableto install) 6,144 6,144 3,072
Data area P P00000 ~ P4095F(65,536 points )
M M00000 ~ M4095F(65,536 points )
K K00000 ~ K4095F(65,536 points )
L L0000 ~ L11263F(180,224 points )
F F0000 ~ F4095F(65,536 points )
T 100ms : T0000 - T2999 Timer (Adjustable)
10ms : T3000 - T5999
1ms : T6000 - T7999
0.1ms : T8000 - T8191
C C0000 ~ C4095
S S00.00 ~ S255.99
D D0000 ~ D524287 D0000 ~ D262143
U U0.0~U7F.31 U0.0~U3F.31 Special module data refresh area
Z 256 points
N N00000 ~ N21503
R 16 block 8 block 2 block 32Kwordper1block(R0~R32767)
Flash area 2M byte, 32 blocks Controllable by R device
Program type Total program 256
Initialization 1 (_INT)
Time-driven 32
Internal 32
Operation mode RUN, STOP, DEBUG
Self-diagnosis Execution, Delay, Memory error, I/O error, Battery error, Power error Modbus slave
Programming port RS-232C (1Ch), USB (1Ch)
Data retention at power failure Set “retain” at data declaration
Max. expansion stage 7 3 Total length 15m
Current consumption (mA) 960
Weight (Kg) 0.12


Item Description Remarks
XGK-CPUU XGK-CPUH XGK-CPUA XGK-CPUS XGK-CPUE
Operation method Cyclic execution of stored program, Time-driven interrupt, Process-driven interrupt -
I/O control method Batch processing by scan synchronization (Refresh), Direct input/output by instruction -
Program language Ladder diagram, Instruction list, SFC(Sequential Function Chart), ST(Structured Text) -
Number of instructions Basic 40 -
Application 700 -
Processing speed LD 0.028㎲/Step 0.084㎲/Step -
MOVE 0.084㎲/Step 0.252㎲/Step -
Real number operation ± : 0.602㎲(S), 1.078㎲(D)
X : 1.106㎲(S), 2.394㎲(D)
÷ : 1.134㎲(S), 2.66㎲(D) 		± : 1.442㎲(S), 2.87㎲(D)
X : 1.948㎲(S), 4.186㎲(D)
÷ : 1.442㎲(S), 4.2㎲(D) 		S: Single real number D: Double real number
Program capacity 128Kstep(512KB) 64Kstep(256KB) 32Kstep(128KB) 16Kstep(64KB) -
I/O points(availableto install) 6,144 3,072 1,536 -
Data area P P00000 ~ P2047F(32,768 points) -
M M00000 ~ M2047F(32,768 points) -
K K00000 ~ K2047F(32,768 points) -
L L0000 ~ L11263F(180,224 points) -
F F0000 ~ F2047F(32,768 points) -
T 10ms : T1000 - T1499  100ms : T0000 - T0999
1ms : T2000 - T2047  1ms : T1500 - T1999 		-
C C0000 ~ C2047
S S00.00 ~ S127.99
D D0000 ~ D32,767 D0000 ~ D19,999
U U0.0~U7F.31 U0.0~U3F.31 U0.0~U3F.31 U0.0~U1F.31 Special module data refresh area
Z 128 points
N N00000 ~ N21503 -
R 2 block 1 block 32Kwordper1block(R0~R32767)
Flash area 2M byte, 32 blocks Controllable by R device
Program type Total program 256
Initialization 1 (_INT)
Time-driven 32
Internal 32
Operation mode RUN, STOP, DEBUG
Self-diagnosis Execution, Delay, Memory error, I/O error, Battery error, Power error Modbus slave
Programming port RS-232C (1Ch), USB (1Ch)
Data retention at power failure Set “retain” at data declaration
Max. expansion stage 7 3 1 Total length 15m
Current consumption (mA) 960 940
Weight (Kg) 0.12


XGK/XGI CPU built-in Ethernet specification
Item XGK-CPUSN, CPUHN, CPUUN / XGI-CPUUN Remarks
Ethernet Feature 1 Port -
10/100BASE-TX -
Auto negotiation (Full-duplex and half duplex) -
Auto MDIX Crossover -
Max. Support 4 channel Support 8Kbyte each send and receive channel
Max. Distance between nodes : 100m -
Max. Protocol size : 1500Byte IP Fragmentation is not supported.
Cable UTP, STP, FTP cables is available FTP, STP is recommended to prevent noise
Service Setting communication parameters with XG5000 -
Loader service (XG5000 connection) supported Remote stage 1 connection with PLC is available
LS protocol(XGT) supported. Server & TCP supported. Client & UDP not supported.
Other company’s protocol (Modbus TCP/IP) supported