Feature

  • Easy Operation & Control
  • Motor Protection
  • Built-in bypass
  • Compact Design, Easy to integrate
  • Timed Voltage Ramp System
  • Convenient Status and Trip Check with LED Indicator
    • LV SSC Series (Economic): 200~575Vac 18~200A
    • LV SSM Series (Standard): 200~690Vac 24~1250A
    • LV SSH Series (High Voltage): 2.3~13.8kVac 70~1700A

model Soft
Start		 Motor
Protection		 Advanced
Interface		 Internal
Bypass		 Current
Range		 Voltage
Range
SSCe ● ● ~200 A ~575 VAC
SSCi ● ● ● ~200 A ~575 VAC
SSM□ ● ● ● ● ~1250 A ~690 VAC
SSH ● ● ● ● ~1700 A ~15kV
  • Easy Operation & Control
  • Motor Protection
  • Built-in bypass
  • Compact Design, Easy to integrate
  • Timed Voltage Ramp System
  • Convenient Status and Trip Check with LED Indicator
    • LV SSC Series (Economic): 200~575Vac 18~200A
    • LV SSM Series (Standard): 200~690Vac 24~1250A
    • LV SSH Series (High Voltage): 2.3~13.8kVac 70~1700A

model Soft
Start		 Motor
Protection		 Advanced
Interface		 Internal
Bypass		 Current
Range		 Voltage
Range
SSCe ● ● ~200 A ~575 VAC
SSCi ● ● ● ~200 A ~575 VAC
SSM□ ● ● ● ● ~1250 A ~690 VAC
SSH ● ● ● ● ~1700 A ~15kV

Specifications

SSC Series

Items Specifications
Main Supply Main Voltage (L1, L2, L3)
- SSC□-□□□-V4
- SSC□-□□□-V6		 200~440VAC (+10/-15%)
200~575VAC (+10/-15%)
Main Frequency (at start) 45 to 66 Hz
Rated Insulation Voltage 600VAC
Form Designation Bypassed, Semiconductor Motor Starter form 1
Control Voltage
(A1, A2, A3)		 SSC□-□□□-□□-C1 110~240VAC (+10%/-15%)
SSC□-□□□-□□-C1 380~440VAC (+10%/-15%)
SSC□-□□□-□□-C2 24VAC/VDC((±20%)
Current Consumption (During Run) < 100mA
Current Consumption (Inrush)
- SSC□-□□□-□□-C1
- SSC□-□□□-□□-C2		 10A
2A
Inputs Start (Terminal 01) Normally open (150kΩ@300VAC and 5.6kΩ@24VAC/VDC)
Stop (Terminal 02) Normally Closed (150kΩ@300VAC and 5.6kΩ@24VAC/VDC)
Outputs Main Contactor
(Terminals 13,14)		 Normally Open (6A, 30VDC / 6A, 250VAC Resistive)
Programmable Relay
(Terminals 23,24)		 Normally Open (6A, 30VDC / 6A, 250VAC Resistive)
Environmental Degree of Protection
SSC□-018 to SSC□-060		 IP20
Degree of Protection
SSC□-075 to SSC□-200		 IP00
Operating Temperature -10°C to +60°C
Storage Temperature -25°C~60°C (to +70°C for Less than 24 Hours)
Humidity 5%~95% Relative Humidity
Pollution Degree Pollution Degree 3
Vibration IEC 60068 Test Fc Sinusoidal
4Hz to 13.2Hz : ±1mm Displacement
13.2Hz to 200Hz : ±0.7g
EMC Emission Equipment Class (EMC) Class B
Conducted Radio Frequency Emission 0.15MHz to 0.5MHZ: <56~46dB (uV)
0.5MHz to 5MHz: <46dB (uV)
5MHz to 30MHz: <50dB (uV)
Radiated Radio Frequency Emission 30MHz to 230MHz: <30dB (uV)
EEMC Immunity Electrostatic Discharge 4kV Contact, 8kV are Discharge
Radio Frequency Electromagnetic Field 0.15MHz to 1000MHz: 140dB(uV)
Rated Impulse Withstand Voltage (Fast Transients 5/50ns) 2kV Line to Earth, 1kV Line to Line
Voltage Dip and Short Time Interruption 100ms (at 40% Nominal Voltage)
Harmonics and Distortion IEC 61000-2-4 (Class 3), EN/IEC61800-3
Short Circuit Rated Short-circuit Current SSC□-018 to 060 5KA*
Rated Short-circuit Current SSC□-075 to 200 10KA*
Heat Dissipation During Start 3 watts / Ampere
During Run 10 Watts Typical
Operational Life SSC□-018 to 060 1,000,000 Operations
SSC□-075 to 200 30,000 Operations
* These short circuit rating are with fuses used as given in the table under ‘Semiconductor Fuses’ section on manual.

 

SSM Series

Items Specifications
Supply Main Voltage (L1, L2, L3)
- SSM□-□□□B-V5
- SSM□-□□□B-V7		 200~525VAC (±10%)
380~690VAC (±10%)
Control Voltage (A1, A2, A3)
- SSM□-□□□B-□□-C1 (A1, A2)
- SSM□-□□□B-□□-C1 (A2, A3)
- SSM□-□□□B-□□-C2 (A1, A2)		 110~120VAC (+10%/-15%), 600mA
220~240VAC (+10%/-15%), 600mA
24VAC/VDC((±20%), 2.8A
Main Frequency 50~60Hz (±5Hz)
Rated Insulation Voltage to Earth 600VAC
Rated Impulse Withstand Voltage 6KV
Form Designation Bypassed or Continuous, Semiconductor Motor Starter form 1
Short Circuit
Capability		 Coordination
with Semiconductor Fuses		 Type 2
Coordination with HRC Fuses Type 1
Electromagnetic
Capability
(Compliant with
EU Directive
2014/35/EU)		 EMC Immunity IEC 60947-4-2
EMC Emissions NIEC 60947-4-2 Class B
Inputs Input Rating Active 24VDC, 8mA Approx.
Motor Thermistor (B4, B5) Trip>3.6kΩ, reset<1.6kΩ< /td>
Outputs Relay Outputs
- Main Contactor (33, 34)
- Relay Output A (41, 42, 44)
- Relay Output B (53, 54)		 10A@250VAC Resistive, 5A@250VAC AC15 pf 0.3
Normally Open
Changeover
Normally Open
Analog Output (21, 22)
- Maximum Load
- Accuracy		 600Ω (12VDC@20mA)
±5%
Environmental Operating Temperature -10°C~60°C, Above 40°C with Derating
Storage Temperature -25~+60°C
Operating Altitude 0~1000m, Above 1000m with Derating
Humidity 5%~95% Relative Humidity
Pollution Degree Pollution Degree 3
Vibration IEC 60068-2-6
Protection
- SSM□-0024B ~ 0135B
- SSM□-0184B ~ 1250B		 P20
IP00
Heat Dissipation During Start 4.5 Watts per Ampere
During Run
- SSM□-0024B ~ 0052B
- SSM□-0064B ~ 0135B
- SSM□-0184B ~ 0250B
- SSM□-0352B ~ 0580B
- SSM□-0835B ~ 1250B		 ≤ 35 Watts Approx
≤ 50 Watts Approx
≤ 120 Watts Approx
≤ 140 Watts Approx
≤ 180 Watts Approx
Motor Overload Protection Default The Default Settings of Parameters 1D,
1E and 1F Provide Motor Overload
Protection Class 10, Trip Current 105%
of FLA (Full Load Amperage) or Equivalent.
Operational Life Operational Life 100,000 Operations

 

SSH Series


Panel Rating
Items Specifications
Rated Voltage 3.6kV - 17.5kV
Rated Busbar Current Up to 2000A
Rated short time withstand current / Peak Up to 50kA, 3 sec / 125kA
Internal arc Fault IAC Classification Up to AFLR 50kA, 1 sec
Partition Classification PM /PI
Loss of Service Continuity LSC1 / LSC2 / LSC2B
IP4X protection rating IP4X (IP54 Option)
Altitude < 1000m (without Reduced Capacity)
Ambient Temperature -10℃ - 60℃ (Reduced Capacity when Over 50°C)
Basic Panel Color RAL7035 (Additional Option)

 

Technical Data
Items Specifications
Motor Voltage 2.3-13.8 kV
Control Voltage 85-264 VAC or 90-350 VDC
Frequency 45/66 Hz (Autotrigger)
Soft Starter Current 70 A - 1700 A
Starting Time (max) 1sec – 30sec (180sec)
Ambient Temperature -10°C ~ 60°C (Reduced Capacity when Exceeding 50°C)
Maximal Altitude 1000m (Reduced Capacity when Exceeding 1000m)
IP (Module type) IP00
IP (Controller) Up to IP54/NEMA12
Overload Capacity Up to 600% for 120sec
PT Type EPT Type
CT Type High-voltage CT (Primary Current Based on the Motor; secondary 1A)
MV/LV Separation 100% Optical Cable Connection
Digital Input 3 Fixed Values (Start, Stop and Reset) 2 Settable Values (A and B)
Relay Output 4 Fixed Values (Line, Bypass, PFC and PAPS) 3 Settable Values (A, B and C)
Analog Output 1 Analog Output (4-20mA)
Fieldbus Communication Modbus RTU, Modbus TCP, Profibus, Profinet, DeviceNet, Ethernet/IP, USB, IEC61850
SSC Series

Items Specifications
Main Supply Main Voltage (L1, L2, L3)
- SSC□-□□□-V4
- SSC□-□□□-V6		 200~440VAC (+10/-15%)
200~575VAC (+10/-15%)
Main Frequency (at start) 45 to 66 Hz
Rated Insulation Voltage 600VAC
Form Designation Bypassed, Semiconductor Motor Starter form 1
Control Voltage
(A1, A2, A3)		 SSC□-□□□-□□-C1 110~240VAC (+10%/-15%)
SSC□-□□□-□□-C1 380~440VAC (+10%/-15%)
SSC□-□□□-□□-C2 24VAC/VDC((±20%)
Current Consumption (During Run) < 100mA
Current Consumption (Inrush)
- SSC□-□□□-□□-C1
- SSC□-□□□-□□-C2		 10A
2A
Inputs Start (Terminal 01) Normally open (150kΩ@300VAC and 5.6kΩ@24VAC/VDC)
Stop (Terminal 02) Normally Closed (150kΩ@300VAC and 5.6kΩ@24VAC/VDC)
Outputs Main Contactor
(Terminals 13,14)		 Normally Open (6A, 30VDC / 6A, 250VAC Resistive)
Programmable Relay
(Terminals 23,24)		 Normally Open (6A, 30VDC / 6A, 250VAC Resistive)
Environmental Degree of Protection
SSC□-018 to SSC□-060		 IP20
Degree of Protection
SSC□-075 to SSC□-200		 IP00
Operating Temperature -10°C to +60°C
Storage Temperature -25°C~60°C (to +70°C for Less than 24 Hours)
Humidity 5%~95% Relative Humidity
Pollution Degree Pollution Degree 3
Vibration IEC 60068 Test Fc Sinusoidal
4Hz to 13.2Hz : ±1mm Displacement
13.2Hz to 200Hz : ±0.7g
EMC Emission Equipment Class (EMC) Class B
Conducted Radio Frequency Emission 0.15MHz to 0.5MHZ: <56~46dB (uV)
0.5MHz to 5MHz: <46dB (uV)
5MHz to 30MHz: <50dB (uV)
Radiated Radio Frequency Emission 30MHz to 230MHz: <30dB (uV)
EEMC Immunity Electrostatic Discharge 4kV Contact, 8kV are Discharge
Radio Frequency Electromagnetic Field 0.15MHz to 1000MHz: 140dB(uV)
Rated Impulse Withstand Voltage (Fast Transients 5/50ns) 2kV Line to Earth, 1kV Line to Line
Voltage Dip and Short Time Interruption 100ms (at 40% Nominal Voltage)
Harmonics and Distortion IEC 61000-2-4 (Class 3), EN/IEC61800-3
Short Circuit Rated Short-circuit Current SSC□-018 to 060 5KA*
Rated Short-circuit Current SSC□-075 to 200 10KA*
Heat Dissipation During Start 3 watts / Ampere
During Run 10 Watts Typical
Operational Life SSC□-018 to 060 1,000,000 Operations
SSC□-075 to 200 30,000 Operations
* These short circuit rating are with fuses used as given in the table under ‘Semiconductor Fuses’ section on manual.

 

SSM Series

Items Specifications
Supply Main Voltage (L1, L2, L3)
- SSM□-□□□B-V5
- SSM□-□□□B-V7		 200~525VAC (±10%)
380~690VAC (±10%)
Control Voltage (A1, A2, A3)
- SSM□-□□□B-□□-C1 (A1, A2)
- SSM□-□□□B-□□-C1 (A2, A3)
- SSM□-□□□B-□□-C2 (A1, A2)		 110~120VAC (+10%/-15%), 600mA
220~240VAC (+10%/-15%), 600mA
24VAC/VDC((±20%), 2.8A
Main Frequency 50~60Hz (±5Hz)
Rated Insulation Voltage to Earth 600VAC
Rated Impulse Withstand Voltage 6KV
Form Designation Bypassed or Continuous, Semiconductor Motor Starter form 1
Short Circuit
Capability		 Coordination
with Semiconductor Fuses		 Type 2
Coordination with HRC Fuses Type 1
Electromagnetic
Capability
(Compliant with
EU Directive
2014/35/EU)		 EMC Immunity IEC 60947-4-2
EMC Emissions NIEC 60947-4-2 Class B
Inputs Input Rating Active 24VDC, 8mA Approx.
Motor Thermistor (B4, B5) Trip>3.6kΩ, reset<1.6kΩ< /td>
Outputs Relay Outputs
- Main Contactor (33, 34)
- Relay Output A (41, 42, 44)
- Relay Output B (53, 54)		 10A@250VAC Resistive, 5A@250VAC AC15 pf 0.3
Normally Open
Changeover
Normally Open
Analog Output (21, 22)
- Maximum Load
- Accuracy		 600Ω (12VDC@20mA)
±5%
Environmental Operating Temperature -10°C~60°C, Above 40°C with Derating
Storage Temperature -25~+60°C
Operating Altitude 0~1000m, Above 1000m with Derating
Humidity 5%~95% Relative Humidity
Pollution Degree Pollution Degree 3
Vibration IEC 60068-2-6
Protection
- SSM□-0024B ~ 0135B
- SSM□-0184B ~ 1250B		 P20
IP00
Heat Dissipation During Start 4.5 Watts per Ampere
During Run
- SSM□-0024B ~ 0052B
- SSM□-0064B ~ 0135B
- SSM□-0184B ~ 0250B
- SSM□-0352B ~ 0580B
- SSM□-0835B ~ 1250B		 ≤ 35 Watts Approx
≤ 50 Watts Approx
≤ 120 Watts Approx
≤ 140 Watts Approx
≤ 180 Watts Approx
Motor Overload Protection Default The Default Settings of Parameters 1D,
1E and 1F Provide Motor Overload
Protection Class 10, Trip Current 105%
of FLA (Full Load Amperage) or Equivalent.
Operational Life Operational Life 100,000 Operations

 

SSH Series


Panel Rating
Items Specifications
Rated Voltage 3.6kV - 17.5kV
Rated Busbar Current Up to 2000A
Rated short time withstand current / Peak Up to 50kA, 3 sec / 125kA
Internal arc Fault IAC Classification Up to AFLR 50kA, 1 sec
Partition Classification PM /PI
Loss of Service Continuity LSC1 / LSC2 / LSC2B
IP4X protection rating IP4X (IP54 Option)
Altitude < 1000m (without Reduced Capacity)
Ambient Temperature -10℃ - 60℃ (Reduced Capacity when Over 50°C)
Basic Panel Color RAL7035 (Additional Option)

 

Technical Data
Items Specifications
Motor Voltage 2.3-13.8 kV
Control Voltage 85-264 VAC or 90-350 VDC
Frequency 45/66 Hz (Autotrigger)
Soft Starter Current 70 A - 1700 A
Starting Time (max) 1sec – 30sec (180sec)
Ambient Temperature -10°C ~ 60°C (Reduced Capacity when Exceeding 50°C)
Maximal Altitude 1000m (Reduced Capacity when Exceeding 1000m)
IP (Module type) IP00
IP (Controller) Up to IP54/NEMA12
Overload Capacity Up to 600% for 120sec
PT Type EPT Type
CT Type High-voltage CT (Primary Current Based on the Motor; secondary 1A)
MV/LV Separation 100% Optical Cable Connection
Digital Input 3 Fixed Values (Start, Stop and Reset) 2 Settable Values (A and B)
Relay Output 4 Fixed Values (Line, Bypass, PFC and PAPS) 3 Settable Values (A, B and C)
Analog Output 1 Analog Output (4-20mA)
Fieldbus Communication Modbus RTU, Modbus TCP, Profibus, Profinet, DeviceNet, Ethernet/IP, USB, IEC61850

Keypad

Display Unit + Keypad Control
Display Unit + Keypad Control

Specification

Input inputvoltage 3 Pahse, 230~500V, 690V(-20%~+15%)
Supply frequency 47~62Hz
Control votage 220~230V(±10%)
Output Output voltage 0~100% Supply voltage
Output frequency 47~62Hz
Efficiency [at full load] >99%
Environmental
Conditions		 Ambient temperature -10℃ ~ +45℃
Altitude losses Below 3,000m★
Ambient humidity Less 95%(non-condensing)
Enclosure IP20
Serial
Communications		 Standard RS232/485, Modbus
Option Profibus, DeviceNet
Motor
Protections		 Input phase missing, High current, Low input voltage, Starting
current limit, Ortor locked, Moter overload(thermal model),
Undefload, Phase unbalance, Moter overtemperature(PTC, normal
status 150R-2k7), Shearpin current
Protections Thyristor fault, SS7 over temperature
Sources Control Localvia keypad, Remotevia digital inputs,
Remotevia Serial Conmmunications (Mobus, RS232/485)

★More 1,000m, 1% derating each 100m

Adjustments★★ Torque surge, Initial torque, Initial torque time, Acceleration time
Current limit : 1~in, Overload : 0.8~1.2In, Overload slope : 0~10,
Deceleration time / Freewheel stop, DC braking, Slow Speed(1/7
fundamental frequency), Dual setting Number of starts allowde,
Torque contriol, Water hammer surge control stop
Input Signals 2 analoque input, 0-20mA or 4-20mA, 0-10V
5 configurable digital inputs
1 PTC input
Output Signals 1 analogue output 0-20mA or 4-20mA
3 changeover output relats (250VAC, 10A non inductive)
Display
Information		 Phase current, Supply voltage, Relays status, Digital inputs/ PTC
status, Analogue inputs value, Analogue output value, Overload
status, Motor supply frquency, Moter power factor, Developed
power, Motor shaft torque, Fault history (5 most recent faults)
LED'sIndications LED1 (green) : Voltage present on control board
LED2 (orange) : Blinking, Motor accelerating/ decelerating
On, moter running
LED3 (red) : Fault present

★★For additional information consult the technical manual

Input inputvoltage 3 Pahse, 230~500V, 690V(-20%~+15%)
Supply frequency 47~62Hz
Control votage 220~230V(±10%)
Output Output voltage 0~100% Supply voltage
Output frequency 47~62Hz
Efficiency [at full load] >99%
Environmental
Conditions		 Ambient temperature -10℃ ~ +45℃
Altitude losses Below 3,000m★
Ambient humidity Less 95%(non-condensing)
Enclosure IP20
Serial
Communications		 Standard RS232/485, Modbus
Option Profibus, DeviceNet
Motor
Protections		 Input phase missing, High current, Low input voltage, Starting
current limit, Ortor locked, Moter overload(thermal model),
Undefload, Phase unbalance, Moter overtemperature(PTC, normal
status 150R-2k7), Shearpin current
Protections Thyristor fault, SS7 over temperature
Sources Control Localvia keypad, Remotevia digital inputs,
Remotevia Serial Conmmunications (Mobus, RS232/485)

★More 1,000m, 1% derating each 100m

Adjustments★★ Torque surge, Initial torque, Initial torque time, Acceleration time
Current limit : 1~in, Overload : 0.8~1.2In, Overload slope : 0~10,
Deceleration time / Freewheel stop, DC braking, Slow Speed(1/7
fundamental frequency), Dual setting Number of starts allowde,
Torque contriol, Water hammer surge control stop
Input Signals 2 analoque input, 0-20mA or 4-20mA, 0-10V
5 configurable digital inputs
1 PTC input
Output Signals 1 analogue output 0-20mA or 4-20mA
3 changeover output relats (250VAC, 10A non inductive)
Display
Information		 Phase current, Supply voltage, Relays status, Digital inputs/ PTC
status, Analogue inputs value, Analogue output value, Overload
status, Motor supply frquency, Moter power factor, Developed
power, Motor shaft torque, Fault history (5 most recent faults)
LED'sIndications LED1 (green) : Voltage present on control board
LED2 (orange) : Blinking, Motor accelerating/ decelerating
On, moter running
LED3 (red) : Fault present

★★For additional information consult the technical manual

Ratings

Standard

230 ~ 500V (-20% ~ +10%)

Frame Code Rated I (A) Power motor until (kW)
230V 400V 440V 500V
1 SS70009 9 2 4 5 5.5
SS70017 17
Standard

230 ~ 500V (-20% ~ +10%)

Frame Code Rated I (A) Power motor until (kW)
230V 400V 440V 500V
1 SS70009 9 2 4 5 5.5
SS70017 17